The Spada Transfer Technology Bar Loader is a product that can applied to either new or pre-existing machines and adapts to the customer’s needs.
With extreme facility and a minimum time commitment, it can be fed bars a minimum of 1 meter long and a maximum of 6 meters, while the diameter of the bar can vary from a minimum of 6 mm to a maximum of 100 mm.
The bar is fixed in order to avoid generating vibrations and to increase the machining precision. This optimizes the cutting parameters that usually are influenced by the rotating bar.
The fixed bar allows material to be acquired that is not extremely precise and consequently dramatically reduces production costs.
The loader is equipped with a cutting unit and piece magazine with two functions:
The first involves the constant feed of the machine in masked time;
The second masks the bar changeover time, significantly increasing the machine productivity.
It optimizes the final waste, which is a shorter length than the machined part and consequently significantly reduces the production costs.
It can be supplied in the multiple bar version to optimize production costs and time.
It can cut two bars at the same time, optimizing costs and production time without any limits to the diameter within the proposed range.
It is made with a bar magazine that can hold a customized quantity.
|Model||Bar length||Bar diameter||Cutting system|
|C1BR3M||3 m||Ø 6mm – 100mm||Single|
|C2BR3M||3 m||Ø 6mm – 100mm||Double|
|C1BR6M||6 m||Ø 6mm – 100mm||Single|
|C2BR6M||6 m||Ø 6mm – 100mm||Double|
|C1BR3/6M||3/6 m||Ø 6mm – 100mm||Single|